| Spot UV Coating |
| Printing technology |
- MGI’s exclusive inkjet engine technology.
- Drop-on-Demand (Dod) inkjet application.
- Piezoelectric print heads in single pass printing.
- Flexible & scalable architecture.
|
| Coating thicknesses |
Depending on your file and the substrate used, the coating thickness can vary from a traditional flat spot UV coating of 3 microns (µm) up to 200 µm for 3D raised texture effects and a tactile finish. |
| Production speed |
Up to 3,123* ISO B2 sheets size per hour (flat spot UV coating or 2D).
* speed will vary according to printing parameter used. |
| Registration |
Left & right motorized registration side guides. Automatic registration using the built-in AIS SmartSanner technology for real-time management of entire sheet. No registration marks required.
Overall registration of ± 200 microns. |
| Formats |
Min : 21x29.7 cm / 8.27x11.7’’ (width x length)
Max : 52x105 cm / 20x42’’ (standard)
64x120 cm / 25x47’’ (extended)*
* with the pallet feeder and stacker options. |
| Paper thickness |
Min : 135 gsm and not less than 150 µm / 6 mil before printing & lamination.
Max : Up to 600 gsm. |
| Substrates |
Enhancement on most* matte or glossy laminated surfaces, with or without aqueous coating, layered paper, plastic, PVC and other coated materials.
Spot 3D coat directly onto most* digital prints (ie. MGI Meteor).
* confirm substrate/lamination/toner/metallic film compatibility with MGI. |
| Printing width |
51 cm / 19’’ (standard)
56 cm / 22’’ (extended)*
* with the pallet feeder and stacker options. |
| UV coatings and yields |
Several coating formulas available, one dedicated to 2D (flat coat) and the other for 2D/3D usage. The JETvarnish 3D comes standard with 2 coating tanks and 2 coating circuits allowing a quick changeover between coatings. Tank has a high capacity volume (18 liters / 4.7 US gal.).
“On-the-fly” tank changeover possible during production without any interruption and no waste. |
| iFOIL (hot foiling) |
Optional Digital Hot Foiling module application.
- Production Speed
Up to 1,750* B2 sheets size per hour (or up to 25 m per minute - 65.6ft per minute).
- Films
Optimization system of film consumption.
- Film Rolls
Max. roll diameter and length : ± 30 cm/11.8’’ and from 400 to 2,000 meters of film (1,300 to 6,500 ft). Up to 5 simultaneous film rolls on the same axis (with a minimum of 10 cm/3.9’’ per roll).
2 cores available : 1 inch and 3 inches.
- Maximum Surface
Hot foil substrate surface can not exceed 51x104 cm/ 20.1 x 41'' (standard)
and 55x119 cm / 21.7x46.9'' (extended)**.
- Embossing
3D hot foil raised effects.
The surface of the metallized film may be covered with a layer of varnish or another foil.
* speed will vary according to printing parameter used.
** with the pallet feeder & stacker options.
|
| Other options |
- Corona* ** Substrates treatment module
In-line system made to optimize varnish adhesion on complex printed substrates
- Pallet Feeder support sheets up to size 64x120 cm /25x47’’
- Pallet Stacker support sheets up to size 64x120 cm /25x47’’
- Variable Data Printing (VDP)
Manage and edit files on the workstation
Full variable data (text, graphic, image) for both 2D/3D Spot Coating and Hot Foiling areas
Integrated barcode (1D/2D) reader system & controller
Raster Image Processor (RIP) as an option
* requires substrate above 42 cm width.
** requires paper above 250 Gsm / 250 µm.
|
| Feeder |
High capacity feeder able to handle a paper pile up to 60 cm/23.6’’ high for 52x105 cm (20x42’’) sheets.
Approximately 4,000 sheets at 135 gsm. |
| Paper path |
- 100% flat paper path.
- Vacuum feed system.
- Air feed system.
- Automatic double sheet detection
|
| Stacker |
High capacity stacker able to accomodate stakes up to 60 cm/23.6’’ high for 52x105 cm (20x42’’) sheets.
Approximately 4,000 sheets at 135 gsm. |
| Front end system |
- Intuitive touchscreen software management suite controlled by a 27’’ monitor.
- Includes functions for operators: Job cost calculator, image editor, queue manager and reprint, camera and print-heads settings.
- Dedicated controller for equipment settings and technical data.
- Ethernet connection 10/100/1000 BT in RJ 45.
|
| In-Line UV dryer |
“On-the-fly” drying & curing via integrated UV lamps |
| Dry air |
An onsite dry air system is necessary. |
| Maintenance and technical support |
- Daily maintenance completed in less than 10 min.
- Majority of procedures are automated.
- From cold start to production in less than 15 min.
- Remote troubleshooting & support via included web video camera (high speed internet connection required)
|
| Electrical requirements |
- JETvarnish 3D
400 Volts - 50/60 Hz, 32A (63A plug)
- pills-specification-tab2iFOIL L
400 Volts - 50/60 Hz, 25A (32A plug)
|
| Dimensions (L x W x H) & weight |
JETvarnish 3D + iFOIL
From 8.03 up to 12.72x1.76x1.93 meters*
From 26.35 up to 41.73x5.74x5.97 ft (L x w x h)*
Necessary clearance : 1 meter (3.3ft) on 4 sides.
Up to ± 3,072 kg / 6,773 lbs*
* depending on the configuration selected. |
| Operating environment |
Temperature : from 18 up to 30°C / 64 up to 86°F
Relative humidity between 30 and 50% (no condensation |
| Eco friendly |
- Enhanced UV protection with lower energy consumption than traditional UV systems.
- No makeready, no plates (offset), no screens (silkscreen), no dies (hot foiling), no waste (electricity, paper, varnish and time).
- Reduction of consumables (elimination of many plastics). Closed-circuit system to minimize varnish consumption, thus preventing waste.
|
