| UV Inkjet Technology |
- MGI’s exclusive inkjet engine technology.
- Drop-on-Demand (Dod) inkjet application.
- Piezoelectric print heads in single pass printing.
- Flexible & scalable architecture.
|
| Variabl Coating thicknesses |
Depending on your file and the substrate used, the
coating thickness can vary from a traditional flat spot
UV coating of 3 microns (µm) up to 200 µm for 3DL
raised texture effects and a tactile finish.
|
| Production speed |
Up to 3,123(1) B2 sheets size per hour (flat spot UV
coating or 2D). |
| Registration |
Left & right motorized registration side guides.
Automatic registration using the built-in AIS
SmartSanner technology for real-time management
of entire sheet. No registration marks required.
Overall registration of ± 200 microns. |
| Managed Paper Formats |
Min: 21x29.7 cm / 8.37x11.7’’ (width x length)
Max: 52x105 cm / 20x42’’ (standard)
57x120 cm / 22.4x47’’ (extended)(2)
64x120 cm / 25.2x47’’ (extended)(3) |
| Printable Width Areas |
51 cm / 19’’ (standard)
54 cm / 21.3’’ (extended)(2)(3) |
| Substrate Thickness |
Min: 135 gsm and not less than 150 µm /
6 mil before printing & lamination.
Max: Up to 600 gsm.
|
| Substrate Compatibility |
Enhancement on most(3) matte or glossy laminated
surfaces, with or without aqueous coating, layered
paper, plastic, PVC and other coated materials.
Spot 3DL coat directly onto most(3) digital prints
(ie. MGI Meteor). |
| UV Coatings and Yields |
Several coating formulas available, one dedicated to
2D (flat coat) and the other for 2D/3D usage. The
JETvarnish 3DL comes standard with 2 coating tanks
and 2 coating circuits allowing a quick changeover
between coatings. Tanks have a high capacity volume
(18 liters / 4.7 US gal.).
“On-the-fly” tank refilling possible during production
without any interruption and no waste.
|
| High Capacity Automatic Feeder |
High capacity feeder able to handle a paper pile up to
60 cm/23.6’’ high for 52x105 cm (20x42’’) sheets.
Approximately 4,000 sheets at 135 gsm.
|
| High Pile Out Stacker |
High capacity stacker able to accomodate stakes up
to 60 cm/23.6’’ high for 52x105 cm (20x42’’) sheets.
Approximately 4,000 sheets at 135 gsm.
|
| Paper Path |
- 100% flat paper path.
-
Vacuum feed system
-
Air feed system.
-
Automatic double sheet detection.
|
| In-line UV Dryer |
- Intuitive touchscreen software management suite.
-
Includes functions for operators:
Job cost calculator, image editor, queue manager and
reprint, camera and print-heads settings.
- Dedicated controller for equipment settings and
technical data.
- Ethernet connection 10/100/1000 BT in RJ 45.
|
| iFOIL L |
- Optional Digital Hot Foiling module application
- Production Speed
- Up to 1,750(1) B2 sheets size per hour (or up to
25 m per minute - 65.6ft per minute).
- Films
- Optimization system of film consumption.
- Film Rolls
- Max. roll diameter and length : ± 30 cm/11.8’’ and
from 400 to 2,000 meters of film (1,300 to 6,500
ft). Up to 3 simultaneous film rolls on the same axis
(with a minimum of 10 cm/3.9’’ per roll).
2 cores available : 1 inch and 3 inches.
- Maximum Surface
- Hot foil substrate surface can not exceed 51x104 cm
(20.1x41’’)(4) or 54x118 cm (21.3x46.5’’)(2)(3).
- Embossing
- 3D hot foil raised effects.
The surface of the metallized film may be covered
with a layer of varnish or another foil.
|
| Other Options |
- Corona(5)(6) Substrates treatment module
- In-line system made to optimize varnish adhesion
on complex printed substrates
- L or XL Pallet Feeder
- support sheets up to size 57 or 64x120 cm /25x47’’
- L or XL Pallet Stacker
- support sheets up to size 57 or 64x120 cm /25x47’’
- Variable Data Printing (VDP)
- Manage and edit files on the workstation
- Full variable data (text, graphic, image) for both
2D/3D Spot Coating and Hot Foiling areas
- Integrated barcode (1D/2D) reader system &
controller
- Raster Image Processor (RIP) as an option
- Remote Technical Support & Maintenance
- Daily maintenance completed in less than 10 min
- Majority of procedures are automated.
- From cold start to production in less than 15 min.
- Remote troubleshooting & support via included
web video camera (high speed internet connection
required).
|
| Dimensions and Weight |
JETvarnish 3DL + iFOIL
From 8.03 up to 12.72x1.76x1.81 meters(7)
From 26.35 up to 41.73x5.74x5.94 ft (L x w x h)(7)
Necessary clearance : 1 meter (3.3ft) on 4 sides.
Up to ± 4,278 kg / 9,431 lbs (7)
|
| Dry Air Requirements |
An onsite dry air system is necessary |
| Electrical Requirements |
- JETvarnish 3D
400 Volts - 50/60 Hz, 32A (63A plug)
-
iFOIL L
400 Volts - 50/60 Hz, 25A (32A plug)
|
| Operating Environment |
Temperature : from 18 up to 30°C / 64 up to 86°F
Relative humidity between 30 and 50%
(no condensation)
|
